CAS No. 26172-55-4, 2682-20-4
Molecular weight: 115.16
Isothiazolinones (CMIT/MIT) is composed
of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and
2-methyl-4-thiazoline-3-ketone (MI). The bactericidal effect
Isothiazolinones (CMIT/MIT) is carried out through breaking the
bond between bacteria and algae protein. When contacted with
Isothiazolinones (CMIT/MIT) can quickly inhibit their growth, thus
leading to death of these microbes.
Isothiazolinones (CMIT/MIT) has strong
inhibition and biocidal effects on ordinary bacteria, fungi
and alga, and has many advantages such as high biocidal
efficiency, good degradation, no residual, safety in
operation, good compatibleness, good stabilization, low cost
Isothiazolinones (CMIT/MIT) can mix with
chlorine and most cation, anion, and non-ionic surfactants.
When used at high dosage, its biosludge stripping effect is
Isothiazolinones (CMIT/MIT) is a kind of
fungicidal with properties of broad spectrum, high
efficiency, low toxicity and non-oxidative, it is the ideal
biocidal in industrial circulating cool water system and in
wastewater treatment in oilfield, papermaking, pesticide,
cutting oil, leather, detergent and cosmetics etc..
Notes: 2%, 4% and 8% or any concentration can be supplied
yellow or light green transparent liquid
|Active content %
|pH (as it)
|CMI/MI (wt %)
When used as
stripper for grade II, the dosage of 150-300mg/L is
preferred, when used as boicide, the dosage of 80-100mg/L is
preferred, and charges every 3-7 days. No used together with
oxidative fungicidal such as chlorine, and no used in
cooling water system containing sulfur. When used together
with quaternary amine, the effect will be better. When used
as industrial fungicide, the dosage of 0.05-0.4% is
Package and Storage:
200L plastic drum, IBC(1000L), customers' requirement. Storage for ten months in shady room and dry place.
Corrosive, Avoid contact with eye and skin,
Wear splash resistant safety goggles and rubber glores.once
contacted, flush with water.